Shark Tooth Drill Bit | Snow Stake & Driveway Marker Installation Drill Bit - 12" Carbide Tip

Shark Tooth Drill Bit | Snow Stake & Driveway Marker Installation Drill Bit - 12" Carbide Tip

$14.99
  • PRO-grade carbide tip drills frozen ground, concrete, asphalt & curbs
  • 12" length x 5/16" diameter, sized for 1/4" & 5/16" fiberglass snow stakes
  • Fits any 3/8" or 1/2" corded or cordless drill
  • Straight pilot holes in seconds, no mallet, no bent stakes
  • Install or re-set driveway markers after the first freeze
  • Only $14.99, add one to any snow stake order

We found other products you might like!

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.

Shark Tooth Drill Bit Built for Snow Plow Professionals

The Discount Snow Stakes Shark Tooth is the snow stake and driveway marker installation drill bit commercial snow removal contractors, municipalities, and homeowners use when the ground is already frozen or the stake has to go into concrete, asphalt, or a curb. Chuck the 12" x 5/16" PRO-grade carbide bit into any 3/8" or 1/2" drill, drill a straight pilot hole in seconds, and slide the fiberglass snow stake in. No mallet, no bent fiberglass, no waiting for a thaw, and no more hand-setting stakes in a parking lot.

Why Plow Pros Keep a Shark Tooth in the Truck

  • PRO-grade carbide tip. Chews through frozen topsoil, ice crust, concrete, asphalt, pavers, and hard-packed gravel where a rubber mallet just bends the stake.
  • 12" overall length. Drills a full-depth pilot hole so your 5/16" and 1/4" fiberglass driveway markers seat 8 to 10 inches deep and stay standing all winter.
  • 5/16" diameter. Sized to match our PRO Line 5/16" snow stakes for a snug fit and still works with 1/4" Flex Pro stakes.
  • Fits any drill. Standard shank drops into any 3/8" or 1/2" corded or cordless drill chuck. Use hammer mode for concrete and curbs.
  • Straight, fast installs. Spiral flutes clear ice chips and dust as you drill, so the hole stays clean and the marker goes in plumb.
  • Late-season and mid-season staking. Set stakes after the first hard freeze, re-set markers a plow knocked over, and mark new accounts you pick up in January.
  • Year-round use. Garden stakes, lot markers, sprinkler flags, survey stakes, and landscape edging in summer.

Specifications

TipPRO-grade carbide
Overall length12"
Diameter5/16"
ShankStandard shank, fits 3/8" and 1/2" drill chucks
Drill modeRotary for frozen ground, hammer mode for concrete and asphalt
Works withAll Discount Snow Stakes 1/4" and 5/16" fiberglass snow stakes and driveway markers
WeightApprox. 2 oz
BrandDiscount Snow Stakes

Contractor & Fleet Orders

Outfitting more than one truck, or adding a bit to a bulk stake order? Add a Shark Tooth to every crew's kit for $14.99 each. Need a large fleet order or a stakes-plus-tools bundle? Contact us or call (866) 938-0922 for contractor and municipal quotes.

How to Install Snow Stakes with the Shark Tooth Drill Bit

  1. Mark your line. Space stakes every 8 to 10 feet along the driveway or lot edge, plus every corner, hydrant, drain, island, and obstacle.
  2. Chuck it up. Drop the Shark Tooth into any 3/8" or 1/2" drill and tighten the chuck. Switch to hammer mode for concrete, curbs, or asphalt.
  3. Drill the hole. Hold the drill plumb and bore 8 to 10 inches straight down through frozen ground or hard surfaces. Pull the bit out once or twice on deep holes to clear the chips.
  4. Set the stake. Slide the fiberglass snow stake into the pilot hole and press it home. Turn the reflective band toward the direction the plow approaches and move to the next stake.

Where to Use It

  • Frozen residential driveways, walkways, and lawn edges
  • Concrete aprons, curbs, parking lot islands, and loading docks
  • Asphalt lot perimeters, plow routes, salt bins, and staging areas
  • Fire hydrants, drains, culverts, mailboxes, and septic covers
  • Hard-packed gravel drives, shoulders, and property lines

Shark Tooth Drill Bit vs. Snow Stake Install Tool

Both get stakes into frozen ground. The Snow Stake Install Tool is a stand-up steel spike and slide hammer for crews punching hundreds of holes in frozen soil with no drill. The Shark Tooth is the drill bit you reach for when the stake has to go through concrete, asphalt, a curb, or rock-hard ground that a spike will not punch. Most contractors keep both on the truck: the install tool for the route, the Shark Tooth for the hard spots.

Shark Tooth Drill Bit FAQ

Will it drill through frozen ground?

Yes. The carbide tip is made for frozen topsoil and ice crust. Run the drill in standard rotary mode, keep it plumb, and the Shark Tooth bores a clean 5/16" pilot hole for the stake in a few seconds.

Does it work in concrete, asphalt, or curbs?

Yes. That is what the carbide tip is for. Switch your drill to hammer mode for concrete and curbs, drill to the depth you need, then slide the fiberglass stake into the hole. It is the easiest way to mark concrete aprons, parking lot islands, and loading docks.

What size drill do I need?

Any 3/8" or 1/2" corded or cordless drill. A cordless drill with a hammer setting is ideal for concrete and asphalt, but a standard drill handles frozen ground.

Which snow stakes does it fit?

The 5/16" hole is sized for our PRO Line 5/16" fiberglass snow stakes and driveway markers in 3 ft, 4 ft, 5 ft, 6 ft, and 8 ft lengths, and also works with 1/4" Flex Pro and Tape/No Cap stakes.

How deep should I drill?

Drill 8 to 10 inches into frozen ground so the stake seats deep enough to survive a plow blade. In concrete or asphalt, 3 to 4 inches is usually plenty to hold the stake upright.

Do I need the Snow Stake Install Tool too?

Not necessarily. The install tool is faster for long runs in frozen soil with no drill. The Shark Tooth is the one that handles concrete, asphalt, curbs, and rocky ground. Most crews carry both.

How many stakes can one bit install?

In frozen soil a single Shark Tooth lasts season after season. Concrete and asphalt wear any bit faster, so crews that mark a lot of hard surfaces keep a spare in the truck at $14.99.

Can I install snow stakes after the ground freezes?

Yes. That is the whole point of the Shark Tooth. Set stakes after the first hard freeze, re-set markers mid-season, and stake new accounts in January without waiting for a thaw.

SKU DSS063
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our  GCU.
  • No inducements have been provided for these reviews.
  • Reviews are published and kept for a period of five years .
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one .
  • The reasons for deletion of reviews are available here.

4.1 /5

Based on 19 customer(s) reviews

Anonymous customer   published 08/07/2023 following an order made on 07/28/2023

5/5

easy to use... makes installation a breeze

Anonymous customer   published 01/02/2023 following an order made on 12/15/2022

5/5

Good to go in frozen ground

Anonymous customer   published 01/21/2020 following an order made on 12/18/2019

2/5

Received my snow stake tool yesterday. By the 3rd stake, the tip is starting to bend.

Anonymous customer   published 12/02/2019 following an order made on 11/11/2019

4/5

have not used yet...was hoping the install tools did the trick and we resorted to using our 15" pipe nipple x 3/4'" with a cap to drive stakes.

Anonymous customer   published 01/01/2020 following an order made on 11/11/2019

1/5

Install tool spike bent during my first 2 inserts into the ground. would not have expected that. The location is usually along the edges of roads and walks and this is normally somewhat rocky...understanding this issue I would think these would be built to withstand these conditions.

Anonymous customer   published 11/10/2019 following an order made on 10/20/2019

5/5

Great quality

Anonymous customer   published 10/22/2019 following an order made on 10/17/2019

5/5

This just made getting ready for winter a lot easier. Good build quality.

Anonymous customer   published 12/11/2018 following an order made on 11/22/2018

5/5

Worked like a charm.

Anonymous customer   published 11/30/2018 following an order made on 11/12/2018

5/5

Worked perfectly. Loved how easily it worked even in frozen solid ground! Highly recommend purchasing this if just buying stakes for the first time!

Anonymous customer   published 11/29/2018 following an order made on 11/26/2018

5/5

Works as it should and the price was good as they had a 50% off sale. Then is was well worth the price. Had purchased before and this time we bought 3 of them.

×